纳秒强激光场中苯电离产生高价离子的研究

用25 ns脉冲Nd-YAG 532 nm的激光，在1010～1011 W•cm－2的光场强度下，利用飞行时间质谱对He、 N2、Ar载气条件下苯的激光电离过程进行了研究.发现当利用氩作为载气时，除观察到C2＋、C2H2+、C3H3+、C6H6+离子外，还观察到很强的Cq＋(q=1～3)高价离子.这些离子都有很高的平动能， C2＋的最可几平动能为12.9 eV， C3＋为37.5 eV.通过改变载气种类和压力及在不同光场强度条件下的实验，可以认为这些高价离子来源于含苯团簇的库仑爆炸过程.     

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

The catalytic properties of several supported metal catalysts on different carriers were studied in the partial oxidation of methane (POM) to syngas. In our experiment, supported noble metal catalysts exhibited better performance than the other supported transition metal catalysts. The catalyst performances were significantly influenced by the d-electron configuration of the active metal components and the dispersion of active metal components on the support. A catalyst with a moderate number of unpaired electrons in the d-orbital of the active metal support without obvious acidity or redox activity (e.g. MgO) was suitable for POM performance. The Rh/SiO2 catalyst was the best in the POM reaction, among those investigated. Reaction conditions apparently also affected the POM performance of the catalyst. The conversion of methane and the selectivity for CO increased with the reaction temperature, and a high CH4/O2 ratio was not beneficial for POM performance.     

循环伏安法研究硝基药物的β-环糊精包含络合物

本文用悬汞电极循环伏安法,研究了甲硝唑、氯霉素、对硝基苯酚和对硝基苯甲酸等药物的伏安性质,用“电流法”测定了药物与β-CD生成包络物的K_f值,并讨论其作用及稳定性。     

新式夹心型光透薄层光谱电化学电解池

本文设计了一种新式夹心型光透薄层紫外-可见光谱电化学池。该池采用铂网工作电极,两侧平行放置铂片为对极置于同一石英窗口夹层中,同时以聚四氟乙烯隔离膜作为边际限制器,结合池内小孔道设置内参比点进行精确的电位控制,具有理想的光谱电化学响应。利用循环伏安、循环电位-吸收、恒电位现场光谱、双电位跃-计时电量、双电位跃-计时吸收等技术,对铁氰化钾在氯化钾溶液中的行为进行了表征。     

高锰酸钾-鲁米诺化学发光体系分子印迹-后化学发光法测定奋乃静

结合分子印迹技术,建立了测定奋乃静的分子印迹-后化学发光(MI-PCL)分析方法。方法的线性范围为1.0×10-4-1.0×10-2g/L,线性相关系数为0.9984;相对标准偏差为4.3%(Cs=1.0×10-3g/L,n=11);方法的检出限为3×10-5g/L。本法应用于尿样中奋乃静含量的测定,结果令人满意。     

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.